Basic Features

4x 2x 1x 1x 1x 1x 1x 1x 1x 4x 3x 1x

Contact

• Station and AP mode 802.11n standard Wi-Fi (integrated antenna)
• PoE 802.3af power support with Ethernet 10/100Mb
• LTE modem - optional

Hardware

• 4 logical inputs - for status monitoring as a condition sensor, infrared motion sensors, two-state option for manual switch, a tick counter for energy meters, and more.
• Variable range analog inputs (3.3V or up to 58V for measurement) - for measuring voltages, DC current, AC current (additional sensors), operating pressure sensors, thermocouples, distance sensors, light measurement for photodiodes, and others.
• Variable range analog input (5V or up to 58V for measurement) - for measuring voltages, DC current, AC current (additional sensors), operating pressure sensors, thermocouples, distance sensors, light measurement for photodiodes, and others.
• Measurement of up to 58V power supply voltage
• Digital input in 1-Wire standard - for measuring up to 8 DS18B20 temperature probes.
• Digital input in I2C standard (with 1-Wire connector on RJ12 port) - for various devices such as temperature and humidity sensors, air quality (PM) sensors, CO2 measurement sensors, and more. See the list of supported sensors below.
• Serial data path (UART) - for connecting devices and sensors listed below.
• RS485 data path for Modbus RTU protocol to support devices and sensors.
• 1 relay (NA, C, NC) 10A/250V.
• 1 transistor output - for controlling loads consuming up to 0.6A of current with the power supply voltage.
• 4 outputs, OC standard transistors for changing relays.
• 3 PWM outputs 1Hz to 1MHz.
• Shipboard temperature and humidity measurement.

Software

• Modern and responsive web interface.
• Configurable status panel - ability to upload your own background, select and place necessary readings and buttons.
• Two-level access (login) - administrator for configuration and user for viewing status.
• Advanced event table with up to 3 conditions that can be entered.
• 50 programmable time events with the Timer (Timer).
• Ability to configure reading from your own Modbus RTU devices (up to 5 non-standard devices).
• Watchdog to monitor and reset IP address devices.
• Modern communication protocols: SNMP, HTTP, and MQTT.
• Support for TLS-encrypted connections for HTTP, SMTP, MQTT, or SNMP v3.
• HTTP client to configure and control other devices. Supports basic and summary access authentication methods.
• Ability to collect data from and control devices and sensors via MQTT protocol on our services and mobile app. Supports many functions including setting up reactions and tasks for multiple devices.
• Send email, MQTT, or SMS notifications (LTE option) after an event.
• Ability to send data from sensors via Modbus TCP.
• Remote control via UDP to multiple devices - useful for applying the button over the Internet.
• Internet time synchronization (NTP).
• Backup and firmware update functions from the device web interface.
• Mobile app.

List of currently supported sensors and devices

• Analog inputs (all sensor range, including current and voltage sensors, supported in hardware and software)
  • AC voltage sensor: AC meter
  • AC current sensors: SCT-013-000, SCT-013-030
  • DC current sensors: ACS711EX_15, ACS711EX_30, ACS709_75, ACS711LC_12.5, ACS711LC_25, ACS711LC20, WCS1800, WCS6800, LA100P, R=0.1Ω
  • temperature sensor: PT1000 (with additional resistor)
• Digital inputs (digital)
  • magnetic sensor for door opening, infrared motion sensor, two-state option for manual switch, heartbeat counter for energy or water meters, time counter for initializations between input resets, e.g., in industrial processes
• 1-wire data path
  • temperature sensor DS18B20
• I2C data path
  • BME280 (humidity, temperature, atmospheric pressure)
  • AM2301B, AHT20, AHT25, AM2320, HTS221 (humidity, temperature)
  • SPS30, APM10 (particulate matter sensor: PM1, PM2.5, PM4, PM10)
  • SCD40, ACD10 (CO2 level sensor)
  • 0.96 inch OLED display
• Serial interface (LTE option not available)
  • particulate matter sensor SPS30 and SDS011
  • CO2 sensors MH-Z16, MH-Z19
  • Duraluxe PV inverters
  • ultrasonic distance sensor
  • 2D and barcode scanner
• Modbus RTU interface
  • 2-way energy meters Eastron SDM120M, SDM72D-M, SDM630M, CHINT DTSU666 (reading power, energy, voltage, current, and other parameters from the meter)
  • Epever Tracer solar energy charge devices
  • Sofarsolar photovoltaic inverters
  • ability to add reading of other devices and sensors through custom configuration
• Modbus TCP
  • Modbus controller, can read sensors connected to Lan Controller (tested with Siemens LOGO)
• HTTP client
  • Tasmota-enabled smart Wi-Fi plugs
  • displaying sensor readings on camera video
  • control relays with Smart Relay