POE - 12 PORT Gigabit Poe Injector (Poe Patch Panel ) 802.3AF/AT

12 Port Gigabit POE Injector (POE Patch Panel) 802.3AF/AT

Features

12 Port Gigabit POE panel is compatible with all Ethernet switches.

It is used in VoIP, IP camera, security solutions, and Wi-Fi projects to avoid cable clutter and manage equal voltage outputs.

In the case of 48V power supply, Mode A power delivery feature of 802.3AF and 802.3AT comes into play. (Suitable Mode A and Mode B power input ports are available on the back of the device.)

Therefore, it provides direct POE power delivery for IP cameras or VoIP phones, Wi-Fi access points, and POE-enabled products in all devices that support 802.3AF and 802.3AT. This means you can add the POE feature to your existing switches without using a POE switch.

Each port has an automatic protected (on/off with reactivation) surge protection of 650mA for 18-57 volts.

12 Port Gigabit POE panel

Passive POE and 802.3af POE use 4/5 pin (+) for voltage and -7/8 pin (-) for -7/8.

It can be used with popular U-BNC cable for POE energy transmission up to 100 meters (for 24 or 48V).

When used with a LAN rollover control product, you can reset/reboot all 12 ports from a single point.

The required adapters are available separately. They may need to be specially ordered for your project.

For 802.11AF/AT usage, at least a 48V - 7.2A adapter is recommended. For other products (used as passive POE injectors), a 24V - 10-15A product can be used.