RBSXTG-5HPnD-SaR2

This product is no longer available. You may consider the RBSXTG-5HPnD-SaR2 product instead.

The STX G is a low-cost high-speed 5 GHz outdoor sector AP. With its Gigabit Port feature and full 802.11n capabilities, it uses a 16dBi high-gain antenna with 26 dBm output power to provide the full advantages of 802.11n over an 8-10 km range. The built-in Level4 license allows you to fully utilize the AP features.

You can use STX G for point-to-point (PTP) or point-to-multipoint (PTMP) connectivity. The STX G's CPE performance enables seamless and industrial-grade use in existing 5 GHz networks.

Product Features

Details
Product code	RBSXTG-5HPnD-SaR2
CPU speed	400MHz
Antenna gain	16dBi
TX power	26dBm
CPU	AR7242
Max Power consumption	7W
RAM	32MB
Architecture	MIPS-BE
LAN ports	1
Gigabit	Yes
MiniPCI	0
Integrated Wireless	Yes
Wireless standards	802.11 a/n
USB	1
Memory Cards	0
PoE	8-30V DC on Ether1
Dimensions	140x140x56mm, 265g
Operating System	RouterOS
Temperature range	-30C to +70C
RouterOS License	L4

Throughput Results

RB SXT/Omnitik/SEXTANT G Series @400Mhz (Dual chain throughput test)			64 byte frames		512 byte frames		1518 byte frames
IP Firewall	Conntrack	Mode	Mbps	Fps	Mbps	Fps	Mbps	Fps
off	off	Bridging	25.4	49600	126.98	31000	221.02	18200
on	off	Routing	23.04	45000	122.88	30000	221.02	18200
on	off	Bridging	16.84	32900	111.41	27200	221.02	18200
on	on	Routing	15.87	31000	102.4	25000	221.02	18200
on	on	Bridging	13.88	27100	90.11	22000	214.95	17700

RB Metal/Groove/SXT/SEXTANT G Series @400Mhz (Ethernet only test)			64 byte frames		512 byte frames		1518 byte frames
IP Firewall	Conntrack	Mode	Mbps	Fps	Mbps	Fps	Mbps	Fps
off	off	Bridging	49.66	97000	370.28	90400	949.66	78200
on	off	Routing	34	66400	266.24	65000	631.49	52000
on	off	Bridging	30.77	60100	234.7	57300	650.92	53600
on	on	Routing	25.6	50000	200.7	49000	479.69	39500
on	on	Bridging	18.02	35200	141.72	34600	386.18	31800

1. Notes:
2. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
3. Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
4. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.
5. http://routerboard.com/pdf/396/SXTG.pdf