With the IP control product, you can turn off and turn on the ports on the device via the network,
email notification can be sent for the status via the SMTP feature.
you can monitor the temperature inside the cabinet with the built-in temperature sensor.

Additionally, you can connect external temperature sensors via the RJ-11 connector input to expand your project. 

You can also set a specific IP address and ping it x times, and if there is no response, you can turn off x,y prizes and turn them on again after 15 seconds. 

 

And there are many programmatic flexibilities in this state, please check the technical documentation. 
With the capabilities of the control software, you can access the web API from .net, php, delphi, Android, iOS application layers and view existing resource information or plan on-off scenarios according to your desired features. 

 

This intelligent prize can be shaped for remote management or alternative programming capabilities in many network projects by sending web requests directly to the device according to your needs. 

This product, which includes many features with programming capabilities, will provide ease for energy control in small system rooms or field cabinets. 

 

Basic Features:

Management option via www or API. 

Firmware update according to custom application 

 

Real-time data display without page refresh 

5 prize on/off via SNMP or web for 5 IP addresses 

 

Watchdog definition for 5 IP addresses (reset on IP ping loss) 

4 temperature sensor monitoring via single cable input 

 

Default environmental temperature control 

Event configuration, (such as turning on the prize automatically when the device's energy goes up and down) 

 

Scheduling to open/close/reset at specific times 

Enter time information manually or via NTP server 

 

Send email or SNMP alerts, watchdog status, temperature information 

Ability to open and close from another LAN controller via API 

Supported Protocols: HTTP, SNMP, SMTP, NTP, ICMP, DNS, DHCP.

 

Technical Features:

Out Port Count :	5
Operating Voltage:	AC 230V
Max A (Current):	10A
Max W (Watt):	2300W
Insurance (Protection):	2x10A
Power Cable:	Internal Power Cable
LAN Connection:	RJ45, 10Mbit
Additional Feature - Connection:	4 sensor support via RJ11 interface